10x120 Klimas Csk (with ribs) Timber Construction Screw T40 (SQ Ceramic C4 Coating)

SKU

WKCS10120

Pack Quantity: 50

Product Details

faster screwing time

In research conducted before implementing the product, we confirmed that the new shape of the screw tip reduces the screwing time by up to 40% with the same load. The savings depend on the type of connection and the wood used.

double thread – faster installation

Additional turns on the point allow you to "catch" the wood faster in the first stage of screwing. This advantage is particularly important in the case of connections where tightening the screw is difficult. The double thread allows us to achieve the same effect with much less pressure.

less resistance when screwing

The new shape of the milling tip reduces the resistance when screwing in by up to 20%. This parameter is particularly important for those specialists who use cordless tools on a daily basis - it extends the battery life.

high strength parameters

The new point of carpentry screws, designed in cooperation with contractors, facilitates installation and is characterized by high-strength parameters such as pull-out strength, shear strength, etc.

Features & Benefits

Countersunk head with TX

Countersunk head ensures the right embedment in the element being installed. TX drive ensures optimum transfer of torque.

Cutting ribs

Allow optimal and smooth countersink with aesthetic finish result.

Double thread

Additional recessed second thread improves remarkably the speed of timber penetration and reaction time of the first grip into the wood.

High torque

Allows screws to be installed without pre-drilling, even in hardwood substrates.

New cutting edge

New special design of cutting edge with added milling reduces screwing resistance by 20%. This helps to extend the life of batteries and power tools

Serrated thread

Special cutting notches are integrated into the thread-cut wood fibers structure while screwing in.

Shank Ribs

Shank ribs reduce installation torque by reaming the hole.

Wax coating

Wax coating applied during the production process significantly reduces the torque. This makes the installation easier, and faster and saves energy, which is important in the case of battery-powered tools.