8x260 Klimas Washer Head Timber Construction Screw T40 (SQ Ceramic C4 Coating)

SKU

WKCP08260

Pack Quantity: 50

Product Details

shorter screwing time

Tests performed before the product has been implemented showed that a new design of the screw tip provides for shortening of the screwing time by even 40% at the same load. Such saving depends on type of connection and the wood used.

double thread – quicker installation

Additional coils on the point allows for faster joining of the fixed wooden member at the first stage of the screw advancing. Such advantage is particularly important with connections where pressing on the screw is hindered. The double thread ensures obtaining the same effect with much lower pressure.

less refusal while screwing

The new design of milling tip reduces the refusal while screwing by up to 20%. This parameter is particularly relevant for such specialists who use power tools on a daily basis – as this extends the battery life.

high resistance parameters

Designed in cooperation with contractors, the new point of carpentry screws facilitates installation and features high resistance, i.e. pull-out resistance, shearing resistance, etc.

Features & Benefits

Double thread

Additional recessed second thread improves remarkably the speed of timber penetration and reaction time of the first grip into the wood.

Flange head with TX drive

Flange head increases the bearing area and provides a tight connection as well as resistance to ensure head pull-through. TX drive guarantees optimum torque transfer.

High torque

Allows screws to be installed without pre-drilling, even in hardwood substrates.

New cutting edge

A new special design of cutting edge with added milling reduces screwing resistance by 20%. This helps to extend the life of batteries and power tools.

Serrated thread

Special cutting notches are integrated into the thread-cut wood fibers structure while screwing in.

Shank Ribs

Shank ribs reduce installation torque by reaming the hole.

Wax coating

Wax coating applied during the production process significantly reduces the torque. This makes the installation easier, faster and saves energy, which is important in the case of battery-powered tools.