Top Features

• The first concrete screw with diameter 6 and variable embedment depths enables high flexibility and a precise adaption on the loads.
• The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements.
• The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards.
• The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates.

Advantages

• The first concrete screw with diameter 6 and variable embedment depths enables high flexibility and a precise adaption on the loads.
• The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements.
• The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards.
• The UltraCut FBS II 6 is approved for multiple use of non-load bearing systems and thereby ideal for the installation of pipe routes, cable trays and prestressed hollow concrete ceilings.
• Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
• Different head designs offer a maximum of flexibility and a perfect adaptation to the application.
• The design of the concrete screw with step thread offers maximum flexibility when mounting threaded rods or connecting elements.
• The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
• The concrete screw UltraCut FBS II 6 offers the possibility for use in masonry (solid building material).
• The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
• The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.