Fischer M12x50 EAN Hammerset Anchor (15mm OD) Yellow ZP (48406)

SKU

FMHA12S

Pack Quantity: 50

The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer.

With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.

Features & Benefits

Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
Use of standard metric screws and threaded rods lowers complexity.
Power-saving series installation with machine setting tool EA II S-SDS.
Visual control due to embossing.
ETA approval for multiple fixings.

Specifications

Diameter	M12
Length	50 mm
Material	Carbon Steel
Finish	Yellow Zinc
Hole Diameter	15 mm
Supplier Part No.	48406

Technical Information

The embossed edge prevents the anchor sleeve from slipping, thus allowing trouble-free hammerset installation.
The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
The machine setting tool EMS allows for effortless installation, particularly in the case of series installations.
The embossing that is applied when expanding with the Setting tool EHS Plus offers a simple control of the anchoring and provides increased safety.
Fixing point on hef 25 mm against inadvertent of the anchor before expansion.
Ideal for applications with high load requirements.

Technical PDF

Load Table - Hammerset anchor EA II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table - Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Load Table - Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in pre-stressed hollow core slabs of concrete C30/37 up to C50/60.