M12 15x85 FIS E Fischer Internal Threaded Sockets (43634)

SKU

FMFISE12

Pack Quantity: 10

The fischer injection internal threaded anchor FIS E is made of zinc-plated steel and is the system component used for using fischer injection mortar in masonry. The internal threaded anchor is set manually by lightly rotating it. The injection mortar bonds the entire surface of the internal threaded anchor with the drill hole wall in solid brick. In hollow building materials the mortar is pressed through the grid on the anchor sleeve and bonds with the perforated brick with an interlock. This means that the load is directed into the building material. Use of the injection internal threaded anchor FIS E allows for surface-flush removal of the fixture.

Advantages

The internal threaded anchor FIS E is suitable for use with injection mortar in masonry or aerated concrete.
The internal threaded anchor FIS E allows for surface-flush removal and the reuse of the fixing point, and therefore offers the best possible flexibility.
The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
Please refer to the approvals for the mortar used.

Features

Conventional metric screws and threaded rods can be used. This lowers costs and complexity.
Surface flush removal possible. Fixing points can be reused.
ETA approval for maximum safety.