Menu
Cart Cart
The image shown is for illustrative purposes only. Actual product may vary.

20x200x250 Keil SDS-Plus Hammer Masonry Drill Bit (4 cutter)

SKU
DMK20250
  • Pack Quantity: 1
Delivery Available for delivery
Click & Collect
-
+

Have a question?

Enquire Now

MS5-TURBOHEAD-Xpro

innovative X-head design with 4 cutting edges for fast and professional work. The reinforced steel-resistant hammer drill bits guarantee a high drilling speed as well as low abrasion. The special head geometry allows optimum pilot drilling and a fast removal of drilling dust as well as remarkably less friction in the drilling hole which results in less development of heat and a low power input for the machine.

MS5 helix

The MS5 flute drills considerably faster than a normal flute. It has a longer service life and reduces the swinging and torsion forces caused during hammer drilling. Therefore no jam of drilling dust occurs. It has a faster drilling speed and transfers the impact energy in an optimal way. The reinforced core and the rounded gradual transitions offer much more breaking strength.

Quality mark

The PGM quality mark stands for a high-quality drilling tool made in a controlled and certified production. Drill bits with this seal drill geometrically exact holes for the safe fixing of licensed plugs and anchors in concrete and masonry.

Vibration Protection

Low vibration load of the hand-arm system by means of significantly reduced vibration. Corresponds to the Directive 2002/44/EC of the European Community for vibration protection.

Features & Benefits

  • MS5 flute with reinforced core
  • Made of chrome-nickel-molybdenum steel, shot-peened and intermediate level hardened /TURBOHEAD Xpro with 4-cutting-edge concept and centering tip
  • High-temperature brazing at about 1,120°C
  • Fits directly into all hammer drilling machines with SDS-plus and HILTI TE-C drive
  • For drilling plug holes
  • Particularly suitable for fastenings

Specifications

Nominal Size 20mm
Shank Form SDS Plus
Brand Keil
Total Length (mm) 250
Working Length (mm) 200
Suitable For Concrete