Impaktor Bits

Impact bits are needed when a strong power tool is used. Impact bits were specifically developed to withstand high power tool forces.

BTH- and BTZ-Bits

BTH- (extra-hard) and BTZ- (tough) bits have an additional tempered BiTorsion zone, which reduces the hardness of the shaft by about 20 % in comparison to the drive tip. This means that the peak loads that cause bit breakage and premature wear are absorbed in this zone - something which enhances the service life of the bits.

"Take it easy" tool finder

"Take it easy" tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool.

Rapidaptor holder

Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Also available in a BiTorsion design.

Chuck-all

The Rapidaptor quick-release chucks hold ¼" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits.

Surface protection

Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection.

Hex-Plus

Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw!

Textile boxes

The textile boxes offer dramatically improved portability, and are space-saving to boot! This means you can now carry the same collection of tools, in a much more compact and comfortable package. The hassle of running back and forth for the right tools has now become a thing of the past. And the much lower weight of a set makes carrying more convenient than ever before. The textile box including the tool will even survive a fall undamaged.

What is included?

813 R Bitholding screwdriver with Rapidaptor quick-release chuck

• 1x    1/4" x 90 mm

889/4/1 K Rapidaptor Universal Bit Holder

• 1x    1/4" x 50 mm

851/1 BTZ bits

• 2x    PH 1 x 25 mm
• 4x    PH 2 x 25 mm
• 2x    PH 3 x 25 mm

851/4 IMP DC Impaktor bits

• 2x    PH 2x50 mm
• 1x    PH 3x50 mm

855/1 BTH bits

• 2x    PZ 1 x 25 mm
• 4x    PZ 2 x 25 mm
• 2x    PZ 3 x 25 mm

855/4 IMP DC Impaktor bits

• 2x    PZ 2x50 mm
• 1x    PZ 3x50 mm

867/1 BTZ TORX® bits

• 2x    TX 10 x 25 mm
• 2x    TX 15 x 25 mm
• 3x    TX 20 x 25 mm
• 2x    TX 25 x 25 mm
• 2x    TX 30 x 25 mm
• 1x    TX 40 x 25 mm

867/4 IMP DC Impaktor TORX® bits

• 1x    TX 25x50 mm
• 1x    TX 30x50 mm
• 1x    TX 40x50 mm

800/1 BTZ bits

• 1x    0.8 x 5.5 x 25 mm
• 1x    1 x 5.5 x 25 mm

840/4 IMP DC Impaktor bits

• 1x    4x50 mm
• 1x    5x50 mm
• 1x    6x50 mm

950 PKS L-key, metric, chrome-plated

• 1x    1.5 x 50 mm 1)
• 1x    2 x 56 mm
• 1x    2.5 x 63 mm
• 1x    3 x 71 mm
• 1x    4 x 80 mm
• 1x    5 x 90 mm
• 1x    6 x 100 mm
• 1x    8 x 112 mm

Hook and Loop Fastener Strip 120

• 1x    120x50 mm

Datasheet

User Manual