FIS V 300T



Product Description

The versatile injection mortar for anchorings in masonry and cracked concrete                    

The fischer high-performance mortar FIS V is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system Thermax. The variant FIS VS LOW SPEED enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW HIGH SPEED enables swift work progress even at low temperatures.

To buy this product CLICK HERE

Advantages

  • The injection mortar FIS V has a range of system approvals, for cracked and non-cracked concrete, masonry, and rebar connections, for example. FIS V is therefore the universal injection mortar family with guaranteed safety for almost every application.
  • FIS VW HIGH SPEED has a significantly shorter hardening time than FIS V, which ensures swift work progress even at low temperatures.
  • The FIS VS LOW SPEED has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths.
  • The extensive range of accessories is perfectly tailored to the injection mortar family FIS V, increases the high flexibility of the system, and thus enables a broad range of applications.

Applications

• Steelwork constructions • Timber constructions • Guard rails • Façades • Staircases • Steel brackets • Machines • Masts • Awnings • Canopies • Gates • Consoles • Pipelines Gratings • Satellite antennas



Functionality

  • FIS V is a 2-component injection mortar based on a vinyl ester hybrid concept.
  • Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
  • The mortar is extruded bubble free from the drill hole base.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
  • The injection cartridges are quick and easy to use with the fischer dispensers.
  • Partially used cartridges can be reused by changing the static mixer.

Building Materials

Approved for anchorings in:

   Approved for:
  • Concrete C20/25 to C50/60, cracked and non-cracked
  • Rebar connections
  • Hollow blocks made from lightweight concrete
  • Remedial wall tie VBS 8
  • Hollow blocks made from concrete
  • Weather facing reconstruction system FWS II
  • Vertically perforated brick
  • Stand-off installation Thermax
  • Perforated sand-lime brick

  • Solid sand-lime brick

  • Aerated concrete

  • Solid brick

Permissions

ETA-02/0024, ETAG 001-5    DoP No. 0126
ETA-08/0266, ETAG 001-5DoP No. 0616-CPF
ETA-10/0383, ETAG 029DoP No. 0756-CPD-0301
ETA-10/0383, ETAG 029DoP No. 0756-CPD-0303
DoP No. 0007DoP No. 0756-CPD-0361
DoP No. 0026ESR-2786
DoP No. 002721843_2
DoP No. 007221843_3dekurz
DoP No. 009418050 /15511 /CT /FA
DoP No. 0094 - EN3538/8141-3 -Nau-




CLICK HERE For Fixperience Software Download

Approvals For Download

FIS_V_300T_ETA_FOR_BONDED_ANCHOR_FOR_USE_IN_CONCRETE_02_0024.pdf

FIS_V_300T_ETA_FOR_USE_WITH_REBAR_08_0266.pdf

FIS_V_300T_ETA_INJECTION_SYSTEM_FOR_USE_IN_MASONRY_10_0383.pdf

GHS-Safety-Data-Sheet-FIS-V-300-T-1.0.pdf